|
|
От
|
Ibuki
|
|
|
К
|
KGI
|
|
|
Дата
|
30.01.2022 12:48:13
|
|
|
Рубрики
|
Современность; Танки;
|
|
Re: Теперь кровати...
>Были еще фото, где к танку прикручена длинная штанга, которая торчит вбок, на конце которой яркий источник ИК(он висит далеко за габаритом корпуса). В сочетании с мешками на МТО и низким разрешением головы Джавелина может сработать. Но против NLAW бесполезно, а он-то более массовый, простой и дешевый.
Торчащие за пределы корпуса танка штуки (например ствол который тоже торчит и тоже горячий и уже есть без всяких штанг) отсекает опреатор во время захвата цели, подгоняя прямоугольник захвата цели под размер корпуса.
>TRACK GATE SOLUTION (SEEKER LOCK-ON)
>4-93. To achieve a seeker lock-on target, the gunner must ensure he has a good image of the target by adjusting the focus, contrast, and brightness while in the WFOV or NFOV. Once the seeker FOV is available, the gunner keeps the target in the center of the FOV and begins his track gate adjustments.
>Tanks and Turretless Targets
>4-94. To ensure a good seeker lock-on, keep the target’s center of mass (the tank’s hull but not the gun barrel) centered in the track gates and adjust the track gates as close to the tank’s edges as possible (Figure 4-26). To increase the probability of a hit, place the track gates around the hull only. Do not include the turret on flank targets.
>Stationary Targets
>4-95. The lock quality for stationary targets is good when the track gates surround the edges of the target. If they are too large or too small, break lock, readjusts the track gates around the target, and relock on the target. Continue this procedure until lock-on is achieved.
>Hull-Down Targets
>4-96. When engaging hull-down vehicles at the maximum distance (2,000 meters), the CLU is limited by track gate adjustments based on the size of the target. Adjust the track gates to acquire only the visible portions of the target