|
|
От
|
Bronevik
|
|
|
К
|
Robert
|
|
|
Дата
|
04.01.2006 03:21:42
|
|
|
Рубрики
|
Стрелковое оружие;
|
|
Ре: Это неправильная...
> Instead, the hot powder gases are fed from the barrel and down to the stainless steel tube into the receiver. Inside the receiver, the rear end of the gas tube enters into the "gas key", a small attachment on the top of the bolt carrier. The hot gases, through the gas key, enter the hollow cavity inside the bolt carrier, and expands there, acting against the bolt carrier and the collar around the bolt body. The pressure of the gases causes the bolt carrier to move back against initially stationary bolt. The linear rearward movement of the carrier initially transferred into the rotation of the bolt, via the cam slot in the bolt carrier and the cam pin, attached to the bolt, that followed the slot. As soon as the bolt is rotated to unlock from the barrel, the bolt group continues its rearward travel under the inertia and the residual pressure in the barrel, extracting the spent case and compressing the buffer return spring, located in the buttstock.
Дык, затворная группа Продолжает двигаться по Инерции и давлением оставшихся в стволе газов.